Socket Head Cap Screw Full Thread 316 Stainless Steel 7/8-9 * 5" [Cup Point] [Allen Drive] Quantity:Bulk [75]

Socket Head Cap Screw Full Thread 316 Stainless Steel 7/8-9 * 5" [Cup Point] [Allen Drive] Quantity:Bulk [75]These screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive. Length is measured from under the head. The screw has a length of 5" and a thread of 7 8 9. Coarse threads are the industry standard: choose these screws if you dont know the pitch or threads per inch. Screws that meet ISO 4762 (formerly DIN 912) comply with specifications for dimensional standards.

The crosses have a thread of 3-8 and a pressure of 150 psi

This rod has a length of 36 and a thread of 5/16-18

drill a pilot hole slightly smaller than the screw

Also known as Class 150 fittings

Use these on thick molds

This socket head cap screw has a length of 65mm with a threading of M16 * 2

Screws that meet ASTMA574

The hooks have a diameter of 1/4

This hexagonal bolt has a length of 7-1/2" with a threading of 7/8-14 [Partially Threaded]

This hexagonal bolt has a length of 8-1/2" with a threading of 1-8 [Partially Threaded]

The screw has a length of 4" and a thread of 1-1/4-7

The nuts have a thread 3/8-24 and a length of 1-3/4