50MM X 3MM Shims

50MM X 3MM ShimsThis steel bucket pin shim is for a pin with an outer diameter of 50 mm. It is 3 mm thick with an OD of 100 mm. Perfect for when you have space between your bucket ears and your machines hook up. Too much of a gap will cause your Bucket to wobble or chatter around on your machine causing wear and tear on your pins and bushings. A bucket pin shim will work just fine if it is a little larger than the Outer Diameter of your pin but not if it is smaller

14" BRUNNER AND LAY

The Customer can do any final tooling such as adding grease fittings or welding on tabs or flags as may be needed

This is a cat diagonal retention series style general purpose bucket tooth with industry standard part number of 208-5235

Dust seal for 65mm Bucket Pin/Boss that measures 65mm x 80mm x 4mm also known as 07145-00065

in the shop or chillin in the yard

It contains 3 metal brackets

Use an 18pn pin and 18lk lock with this tooth

This item should be used to pin on a bucket and may not have the proper characteristics for other attachments

Use a x156 bucket tooth and p156 pin with this adapter

This is the repair latch kit for our 10 ton weld on bucket hook

This is a genuine ESCO Ultralok u25p pointed bucket tooth

This is a genuine ESCO Ultralok u30s general purpose bucket tooth