Bando P96H100 SF QD Timing Belt Pulley (SF) Woodworking & FurnitureBando P96H100 SF The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
ECS101T8H2DF4 SPEC
7 POLES 6 NUMBER SPEEDS 1 RPM 1155 RPM 2 1155 RPM 3 1140 RPM 4 935 RPM 5 935 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 208-230/460 VOLTS 460 VOLTS 2 230 VOLTS 3 208 VOLTS 4 380 VOLTS 5 190 FRME 145 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE UTE OPPOSITE END BEARING 6203-2Z-J/C3 SHAFT END BEARING 6205-2Z-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
0 a Heater Indicator No Heater Insulation Class H Inverter Code Inverter Duty IP Rating NONE KVA Code J Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Termination Flying Leads Motor Type 1054M Mounting Arrangement F1 Number of Poles 4 Overall Length 27
Model_Number DN72 PRODUCT NAME 15 HP - TEFC - 1180 PHASETYPE 3_PHASE MOTOR ENCLOSURE TEFC HORSEPOWER 15 KILOWATTS 11
33-2024Z122 HP
33 % Rated voltage 380 V Rated current 27
Amperes 445 A LRC 7
67 % Rated voltage 400/690 V Rated current 28
Amperes 510 A LRC 7
1 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3514M Mounting Arrangement F1 Number of Poles 4 Overall Length 11
Bando - 9PK1100 Trusted by the world's Top Automakers
875 IN Shaft Extension Location Pulley End Shaft Ground Indicator Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 3450 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
