Bando P28H300 MPB TB Pulley 1 1/8" INDUSTRIAL PUMPSBando P28H300 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
Coil reference Of alternating current 4P Application Contactor CAWM4/CWM9-25 Control voltage 380V 50/60Hz Terminal type Fixing terminal with screw
and low profile design provide extended service life and superior flexibility to handle idler and reverse bend drive configurations typical of many power equipment applications
5 RPM 3450 VOLTS PRIMARY
EM2543T-CI SPEC
0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class H Inverter Code Not Inverter IP Rating NONE KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 14 AWG Motor Type 3728M Mounting Arrangement F1 Number of Poles 2 Overall Length 16
6 RPM 880 FRAME 254T SER
0 A Rated torque 1770 ft
Nominal Outside Length (mm)1024
61 IN Power Factor 83 Product Family Hazardous Location Motor Pulley Face Code Standard Rodent Screen None RoHS Status ROHS NON-COMPLIANT Service Factor 1
lb Locked rotor torque 229 % Breakdown torque 270 % Locked rotor time 36s (cold) 20s (hot) Moment of inertia (J) 2
0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready IP Rating NONE KVA Code F Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 12 @ 4 AWG Motor Type A44068M Mounting Arrangement F1 Number of Poles 2 Overall Length 35
Bando - 4PK914F Stretch-type V-ribbed belt employing low-modulus cord
