Baldor VEBM3546T 1HP, 1770RPM, 3PH, 60HZ, 143TC, 3520M, TEFC, F1 CLOSE COUPLED ODP

Baldor VEBM3546T 1HP, 1770RPM, 3PH, 60HZ, 143TC, 3520M, TEFC, F1 CLOSE COUPLED ODPSpecs Catalog Number VEBM3546T Enclosure TEFC Frame 143TC Frame Material Steel Frequency 60. 00 Hz Motor Letter Type Three Phase Output @ Frequency 1. 000 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 1800 RPM @ 60 HZ Voltage @ Frequency 460. 0 V @ 60 HZ 230. 0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals NEMA_PREMIUM UR NEMA PREMIUM CSA EEV Ambient Temperature 40 C Auxillary Box No Auxillary Box Auxillary Box Lead

375 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 2900 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Wye Start - Delta Run Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings

5 HP - TENV - 1725 PHASETYPE 1_CAPACITOR START MOTOR ENCLOSURE TENV HORSEPOWER

67 % Rated voltage 230/460 V Rated current 94

Flange Size D-508 Sealing Type Not Applicable Bearing Size Bearing 314 Products Line W22 IEEE 841 Downloads

Standard NEMA MG-1 Frequency 60//50 Hz Voltage 230/460//190-220/380-415 V Number of poles 4 Synchronous speed 1800 rpm Output rating 5 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC01 - ODP

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals BLUETOOTH CULUS WEEE Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator No Mounting Bearing Grease Type Polyrex EM (-20F +300F) Blower None Constant Torque Speed Range 6 Current @ Voltage 8

5 a Front Face Code Drip Cover Mounting Front Shaft Indicator None Heater Indicator No Heater Insulation Class B Inverter Code Not Inverter KVA Code M Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3416M Mounting Arrangement F1 Number of Poles 2 Overall Length 11

Flange Size FC-184 Sealing Type Lip Seal Bearing Size Bearing 308 Products Line W21/W22 Downloads

5 POLES 4 NUMBER SPEEDS 1 RPM 1775 HERTZ 60 VOLTS PRIMARY 460 VOLTS 460 FRME 184 SHAFT CODE - MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE JDE OPPOSITE END BEARING 25BC02JPP3 SHAFT END BEARING 30BC02JPP3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1

6 kW) Number of Poles 8/4 Frequency 60 Hz Rated speed 885 rpm Slip 1

7 No load current 98

375 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 3490 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings