Adafruit FTDI Serial TTL-232 USB Cable Oscilloscope

Adafruit FTDI Serial TTL-232 USB Cable OscilloscopeJust about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. This is a USB to TTL serial cable, with a FTDI FT232RL usb serial chip embedded in the head. It has a 6 pin socket at the end with 5V power and ground, as well as RX, TX, RTS and CTS at 3V logic levels. These are perfect for use with a Boarduino, Meggy's, or other Arduino clones and

You can PWM the motor to speed up or slow down the flow rate and if you connect the motor the other way it will move fluid the other direction

or Beagle Bone while preventing icky brown-outs during high current draw because of USB cable resistance

GPS not included

The other side of the cable is terminated with a separated 4-pin connector with the following pinout: RX (Yellow)

You can use it in Soft AP mode to create an ad-hoc network

the connector may be on the output end of the strip

This Dayton Audio SA100 100 watt subwoofer amplifier with adjustable crossover

art or other electronics project with BLE

you need to use an application with software volume control or a (pre-)amplifier with volume control

The VL6180X (sometimes called the VL6180) is a Time of Flight distance sensor like no other you've used

analog inputs

and move a motor when a trigger is detected