Fasco D0614 Refrigeration Motor, 1/10 HP, 1 Ph, 60 Hz, 115/230 V, 1550 RPM, 1 Speed, 42 Frame, OAO Kits

Fasco D0614 Refrigeration Motor, 1/10 HP, 1 Ph, 60 Hz, 115/230 V, 1550 RPM, 1 Speed, 42 Frame, OAO KitsRefrigeration Unit Heater Space Heater Motor 5" Diameter 42 Frame Permanent Split Capacitor (PSC); Capacitor Required: 5 Mfd 370 Volts (Not Supplied with Motor) Thermally Protected Open Air Over Class B Insulation, 40C Ambient Ball Bearing 3 8" Diameter Shaft with Flat 30" Leads Tapped Holes for Shaft End Mounting, Resilient Ring Mounting Additional Information Thermal ProtectionAutomatic Speed1550 rpm Current1. 93 0. 97 A Number of Speeds1 Ambient

Standard IEC 60034-1 Frequency 50 Hz Voltage 220-230-240/380-400-415//460 V Number of poles 2 Degree of Protection IP55 Synchronous speed 3000 rpm Output rating 0

Standard NEMA MG-1 Frequency 60//50 Hz Voltage 230/460//380 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 10 HP Mounting F-2 Flange Without Terminal box¹ Right position Enclosure IC411 - TEFC

@ 25° C 109 Ohms A Ph / 0 Ohms B Ph Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

Amperes 1117 A LRC 7

203 BRG 34CB4800SP CAPACITOR COVER

8 No load current 14

875 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Speed 1760 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T4 Drawings

000 HP Agency Approvals CSA Ambient Temperature 40 °C Armature Current 83

5" Leads with Terminal Plug

Amperes 2422 A LRC 8

lb Locked rotor torque 180 % Breakdown torque 180 % Locked rotor time 18s (cold) 10s (hot) Moment of inertia (J) 0

65 POLES 10 NUMBER SPEEDS 1 RPM 3450 HERTZ 50 VOLTS PRIMARY 115/230 VOLTS 115 VOLTS 2 230 FRME 56 SHAFT CODE J STACK 2