10'6" Liddle Pathfinder surfgear

10'6" Liddle Pathfinder surfgear10'6" x 23 1 2" x 3 1 4" (Fin Included) Greg Liddle's Pathfinder takes the design elements of his displacement hulls and scales up the length to that of a glider. The outline is beautifully elongated with a nice amount of curve; the nose and tail are both slightly pulled in. The bottom contour is heavily rolled for most of the board but it flattens out towards the tail. The rails are foiled out to be pretty knifey while maintaining a lot of volume in

You have to try the Acid

The side bites allow for added drive to propel you down the line or through turns

A rider can vary their pivotability greatly by shifting their back foot in roughly a one foot range: forward allows the rider to bank smooth

its brilliance extends to the entire landscape of your skin

This is a really great all around board that works in so many different types of waves small or large

His Burrito model is a stubby displacement hull that has been highly modified to ride as miniature hull without sacrificing the volume necessary to achieve an effortless glide and extremely high speeds

A deep exploration of iconic photographer and former TSJ photo editor Jeff Divine’s endless catacombs of plenty

7'2" x 19" Nose x 22 1/2" x 15" Tail x 3"

The rails are nicely foiled in the nose then transition to a softer rail towards the middle of the board and end in a hard edge in the tail

Here's a little video of shop owner

This high performance single fin has four deep channels that taper into a narrow pin tail with a fin box for added experimentation

The bottom contour is completely rolled