Bando P34-S14M-80 STS MPB Timing Belt Pulley S4.5M

Bando P34-S14M-80 STS MPB Timing Belt Pulley S4.5MBando P34 S14M 80 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). An Explanation of Synchro Link Drive Pitches With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental

9 POLES 4 NUMBER SPEEDS 1 RPM 1785 HERTZ 60 VOLTS PRIMARY 460 VOLTS 460 FRME 365 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CE OPPOSITE END BEARING 6313-J/C3 SHAFT END BEARING N313-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1

Captive AireDR85H

Bando - SPA1632 In addition to belts manufactured to ARPM (Association for Rubber Products Manufacturers) standards

0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code G Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 2 @ 8 AWG

Amperes 254/146 A LRC 7

Number of Teeth79

Amperes 661/330 A LRC 6

06-0000-0797 FRAME 182TC VOLTS 208-230/460 F

1 FULL LOAD AMPS PRIMARY 92 SERVICE FACTOR AMPS PRIMARY 105 Technical Data

GE5KCP39HGT584S

21 IN Power Factor 64 Product Family General Purpose Pulley Face Code C-Face Rodent Screen None RoHS Status ROHS NON-COMPLIANT Service Factor 1

16-Pin Replacement for ECM 2