Bando P20L100 JA QD Timing Belt Pulley (JA) SEALS

Bando P20L100 JA QD Timing Belt Pulley (JA) SEALSBando P20L100 JA The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance

lb Locked rotor torque 180 % Breakdown torque 200 % Locked rotor time 25s (cold) 14s (hot) Moment of inertia (J) 2

Bando - TL22L050 The type of pulley used on a Synchro-Link® drive depends on a number of factors

3 LB-FT Starting Current 14

Model_Number HA68 PRODUCT NAME 20 HP - ODP - 1775 PHASETYPE 3_PHASE MOTOR ENCLOSURE ODP HORSEPOWER 20 KILOWATTS 14

Bando - 150-S8M-2496 C-X

3 STACK 4 MOUNTING BAND MOTOR TYPE FHP OPPOSITE END BEARING BALL SHAFT END BEARING BALL AMBIENT 70 ROTATION REVERSIBLE SERVICE FACTOR 1 SHIPPING WEIGHT 43 THERMAL PROTECTION T-STAT BREAKDOWN TORQUE 369

Amperes 1800 A LRC 7

Model_Number BW57 PRODUCT NAME 50 HP - ODP - 1775 PHASETYPE 3_PHASE MOTOR ENCLOSURE ODP HORSEPOWER 50 KILOWATTS 37

Catalog Number ECP84410T-5 Enclosure TEFC Frame 444T Frame Material Iron Frequency 60

Frame 444/5TS Output 300 HP (220 kW) Number of Poles 2 Frequency 60 Hz Rated speed 3570 rpm Slip 0

VEM2334T-5 SPEC

7 POLES 2 NUMBER SPEEDS 1 RPM 3525 HERTZ 60 VOLTS PRIMARY 460 VOLTS 460 FRME 184 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CE OPPOSITE END BEARING 6206-J/C3 SHAFT END BEARING 6206-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1