Magigoo PA / Nylon, glue stick Content:50ml

Magigoo PA / Nylon, glue stick Content:50mlMagigoo Pro PA Nylon is a 3D printing polyamide filament adhesive designed for professional use. The part should be relatively easy to remove once it cools down and the glue residue should also be easily cleaned off after printing. Generally there are three common types of Nylon ust in the FDM industry, PA12, PA66 and PA6. These materials can either be compounded with additives or reinforced with glass or carbon fibers. Generally, nylons have high

Flexural modulus 2

Print Speed: 40 mm/s

Tensile Strength at Yield 35 MPa

High temperature resistance

This material is easy to print and has a glossy and smooth surface finish

The PI filament meets the EN 45545

@50 mm/min) 120 MPa ISO 527 Flexural strength (dry

*Printing profile available in Ultimaker Marketplace (Ultimaker certified material)

// // R-PEEK filament

Flexural Modulus 3 350 MPa

Tensile Modulus 3200 Mpa ISO 527 Tensile Stress 105 MPa ISO 527 Impact strength Notched Izod 5

// // Luvocom® 3F PEEK 9581  Filament (Polyether Ether Ketone) Filament