Radial SGI - RX - Radial Engineering SGI - RX Studio Guitar Interface System lavalier

Radial SGI - RX - Radial Engineering SGI - RX Studio Guitar Interface System lavalierStudio Guitar Interface, Replacement part RX only (must be used with TX). The Radial SGI RX Receiver Module When in use, the amplifier is connected at the receive end using the SGI RX. This module is completely passive, thereby not requiring local power. The transformer receives the signal and is wired 'in reverse' to counteract any ringing that may be induced at the input side. It also eliminates ground loops, a common problem when connecting

modulators

Automatic Extreme Voltage Shutdown (EVS) guards your valuable equipment from dangerous wiring faults

The user only has to set channel gain so that the central green indicator in the level meter remains lit for the longest possible time

you will need a host OTG adapter

A combination with RME's HDSPe RayDAT makes a perfect partnership

-256 DMX Channel

Launchpad Mini is the grid controller for any Live performer

3: back-left-down (BLD)

200 MB storage space and 4 GB RAM for Universal Control (required for firmware updates)

Width 124mm

UPC: 615104315617

System Type Two Way Active or Passive Passive Power Rating (Watts) 600 Watts (1200 Watts Peak / 300 Watts Continuous) Biampable No Nominal Impedance (Ohms) 8 Sensitivity (dB @1Watt/1m) 97 Max SPL (dB) 128dB Peak (125dB Continuous) Frequency Response (Hz +/- 3dB) 55 - 18k Crossover Frequency (Hz) 1900 Driver Configuration 12-inch