Bando TL1610 1 1/4 TL BORE 1 1/4 (1.250) DRILL RIG DUTY

Bando TL1610 1 1/4 TL BORE 1 1/4 (1.250) DRILL RIG DUTYBando TL1610 1 1 4 TL bushings are preferred where mounting space is at a premium. The TL bushing can only be installed in the conventional (large end outboard) position.

Frame 160M Output 15 HP (11 kW) Number of Poles 4 Frequency 50 Hz Rated speed 1476 rpm Slip 1

15 STARTCAPMFD N\A SHIPPING WEIGHT 35 BREAKDOWN TORQUE 437 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 326 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER L LOCKED ROTOR AMPS 18

8x(Code G) No load current 11

TraneMOT6130

VLECP4108T SPEC

Catalog Number DRX14244T-5 Enclosure XPFC Frame 145T Frame Material Steel Frequency 60

13 FULL LOAD AMPS PRIMARY 11

25 HP - ODP - 1625 PHASETYPE 1_PERMANENT SPLIT CA MOTOR ENCLOSURE ODP HORSEPOWER

5 POLES 4 NUMBER SPEEDS 1 RPM 1745 RPM 2 1745 RPM 3 1725 RPM 4 1420 RPM 5 1420 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 208-230/460 VOLTS 460 VOLTS 2 230 VOLTS 3 208 VOLTS 4 380 VOLTS 5 190 FRME 145 SHAFT CODE JM MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE DE4 OPPOSITE END BEARING 6203-2Z-J/C3 SHAFT END BEARING 6206-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1

Packard - IG1414

Bando - 6-8VK1120 Power Ace® Aramid Combo

5 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code N Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3532M Mounting Arrangement F1 Number of Poles 2 Overall Length 14